Water Insulation Product


Hi-Tech WP-MS 9400

Description:
It is a single component, high penetration property, transparent wet appearance, acrylic polyurethane concrete protection system product providing dust-free surface and high mechanical strength.
Areas Of Application: -On concrete surfaces with capillary shrinkage cracks
-Production areas of factories
-Outside concrete
-Indoor and outdoor parking areas
-Concrete surface is created in all areas
-To protect all cement based surface coatings and increase their service life.


Surface Preparation: Clean the surface using jet water, if possible. Remove oil, grease and wax contaminants. Cement laitance, loose particles, mould release agents, curing membranes must be removed. Fill surface irregularities with the necessary product. Concrete substrates must have minumum standards as follows.
Concrete substrate conditions (standard):
Hardness: R28=15 Mpa
Humidity: W<10%,
Temperature: 5ºC-35ºC
Relative humidity: <85% Storage:Can be kept for minimum 12 months in the original unopened pails in dry places and at temperatures of 5ºC-25ºC. Once a can has been opened, use as soon as possible.
Packaging:5kg / 10kg / 15 kg bucket.


Technical Specifications

  • Basis: Acrylic polyurethane based resin
  • Color: Transparent / glossy
  • VDensity: 1.0-1,10g / cm³Shore-A
  • Hardness: 70 (DIN 53505)

TDS