Water Insulation Product

  1. Homepage
  2. Water Insulation
  3. Hi-Tech WP-BM 500 2K

Hi-Tech WP-BM 500 2K

Description:
HI-TECH WP-BM500-2K is two component, plumer reinforced, bitumen based, elastic waterproofing material.
Scope Of Application:
On all concrete surfaces, it is applied horizontally and vertically on the ground structures where the insulation should be covered. Basic, basement curtains, terraces, parking on, It is a safe insulation material for flower waterproofing. It is secure in critical detail solutions as it is implemented without additional places

Surface Preparation:The surface must be protected from the surface and must be smooth, free from cracks on the surface and foreign materials to damage. 5 mm deep cracks must be repaired with repair mortars. Bricks and so on. The surface should be leveled by correcting the joints on the wall surfaces that are woven with the materials. inner and outer corners should be softened by chamfering.
Consumption:Recommended dry film thickness;
• Pressurized water: 7.0 kg / m² (4mm dry film)
• Pressurized water: 5.3 kg / m² (3mm dry film)
• Ground humidity, rainwater • Curtain concretes: 5.3 kg / m² (3mm dry film)
Note: 1 mm. Average consumption for dry thickness 1.8 kg / m²
Storage:At least + 5ºC in closed containers for 12 months, open pails should be consumed as soon as possible.
Packaging:30 kg pl. bucket (22 kg bitumen + 8 kg powder)

Technical Specifications

  • Basis: Bitumen-rubber based,2-component
    waterproofing plaster reinforced
    with elastic cushions
  • App. / Surface Temperature: + 5ºC to + 30ºC
  • Application Time: 3-4 hours on average, depending
    on temperature and humidity.
  • Crack Bridging: more than 2 mm DIN 28052-6
  • Water Impermeability: waterproof to 1 mm clearance
  • Elasticity: >900%
TDS